R901 universal decorative adhesive is a single component modified resin adhesive. The solvent evaporates at room temperature and solidifies to form a rubber elastomer. It is used for pasting decorative materials such as wood, sponge, canvas, leather, and rubber.
DESCRIPTION
R
is a single component modified resin adhesive that evaporates solvent at room temperature and solidifies to form a rubber elastomer. It is used for pasting decorative materials such as wood, sponge, canvas, leather, and rubber.
nine hundred
Product Features
O single component environmentally friendly material, non corrosive
O can be brushed or sprayed, easy to use
The adhesive layer is uniform, with good adhesion and no bubbling or layering
O's weather resistance and aging resistance
Suitable for bonding various materials
Main purpose
Adhesive bonding of decorative materials such as sofas, seats, furniture, doors and windows
Self adhesion and mutual adhesion of interior materials such as industrial equipment and automotive vehicles
Specification
The product complies with the GB 18583-2008 standard
nine hundred and one
Usage
The surface of the adhered object should be clean, dry, free of oil stains and dust.
The ambient temperature should not be lower than 15 ℃. The surface drying time in summer is 3-6 minutes, and in winter it is 6-12 minutes. The bonding time is arranged according to the surface drying time.
Fill the O glue solution into the spray gun and evenly spray or brush the glue on both surfaces. The air pressure is controlled at 0.6~0.8MPa; Better spraying distance of 30-50cm; The thickness of the spray adhesive layer is about 0.75mm; The on-site test results shall prevail.
After the O coating dries according to the specified schedule, align the two bonding surfaces and bond them together. Use a pressure roller to roll the bonding area to ensure that the bonding surface is compacted and firmly adhered.
Fill the thinner into the spray can and spray it a few times with air pressure to clean the glue inside the spray gun.
precautions
Apply glue in a ventilated environment
Avoid construction in humid environments below 15 ℃ and above 90% humidity
It is strictly prohibited to spray at a distance exceeding 60cm or adjust the atomization valve to the bottom; Otherwise, flying threads and flocculent substances are prone to occur
For special chemical reactions, please contact our technical department
Packaging specifications
15KG/barrel;
keep in storage
Store in a low temperature environment of 10-20 ℃, with higher temperatures not exceeding 25 ℃.
Safety and health
This product has no toxic effects and is the same as general chemicals. It should not come into contact with food or food utensils. It is recommended to maintain sufficient ventilation in the work environment. In case of entering the eyes or mouth, rinse immediately with water. Store in a safe place, away from children.
statement
The technical parameters mentioned in this article are typical values and are not used as product acceptance criteria. They are for reference only. The above data was obtained under standard laboratory conditions, and our company guarantees its reliability. However, due to different working conditions used by users, different surface states of materials, and different curing conditions, some changes in actual performance data are normal phenomena. Storage conditions, transportation, and other factors can all affect the stability, physical and mechanical properties of the adhesive. We are not responsible for any results obtained by anyone using methods beyond our control. It is recommended that users conduct experiments based on the data provided in this article before formal use.
